Dazzleaf vaporizer

SPACEMAN 510 Cartridge Concealable VV 550mAh PreHeat LED Screen Battery

  • Make a Selection
  • DAZZLEAF SPACEMAN 510 Cartridge Concealable VV 550mAh PreHeat LED Screen Battery                                                                             The Spaceman Cartridge Battery is an innovative and creative 510 concealable cartridge battery. The Spaceman is equipped with preheat mode, four voltage settings, auto draw or button activation, as well as multiple safety protections. Easily check battery and voltage levels right on the Spaceman's helmet. SPACEMAN can adjust the voltages...


DAZZLEAF SPACEMAN 510 Cartridge Concealable VV 550mAh PreHeat LED Screen Battery                                                                            

The Spaceman Cartridge Battery is an innovative and creative 510 concealable cartridge battery. The Spaceman is equipped with preheat mode, four voltage settings, auto draw or button activation, as well as multiple safety protections. Easily check battery and voltage levels right on the Spaceman's helmet.

SPACEMAN can adjust the voltages by the Auto draw & Power Button to your preferences with ease. and the LED Screen can easily tell the voltage/battery when you using it.

With a powerful 550mAh battery and Type C fast charging port, you can enjoy long vaping sessions without having to worry about running out of power. 

Also incredibly versatile SPACEMAN can be compatible with most 510 cartridges up to 2mL.

Watch as the soft and coolest astronaut looks, captivating your eyes with its mesmerizing display. The shape of the body is uneven, and the silicone material can be pinched to give you infinite stress relief and happiness. Whether you prefer standard or high-potency oils, just vape and go.

The SPACEMAN is equipped with four variable voltage settings, preheat mode, LED Screen, short circuits, and overcharging protection.

But don't let its discreet design fool you - this SPACEMAN is packed with a range of 10 colorful that meet your favorite pairing.

Black, White, Luminous Green, Yellow/Green, Blue/Red, 

Yellow/Blue, Purple/Blue, Galaxy, Chaotic, Rasta

Specifications:

Auto Draw Or Power Button For Convenience

Compact Pocket Size: 53.6*44.3*121mm

Weight: 110.5g

Batter Capacity: 550mAh

LED Screen with Removable Magnetic Bottom

Cartridge Size: 14mm*68mm (Fits most 0.5ML ~ 2ML Carts)

Voltage Settings: 2.4V, 3.0V, 3.6V, 4.2V, The Green lights on the Right side of the Screen turn on gradually.

Preheating Function: 1.8V Preheat for 15 seconds.

Auto heat shut-off after 10 seconds of use for protection

Auto screen blanking after 5 seconds of no operation

30-minute Safety Shutoff

See Your Battery Level and Voltage All on the helmet

 

Quick Start Instructions

The SPACEMAN should be charged for an hour before the first use.

Remove the bottom magnetic end. Insert your 510 threaded cartridges.

 

Auto Draw Function:

5 x quick puffs to power the vape on, 2 x quick puffs to activate the pre-heat mode, and 3 x quick puffs to change the voltage settings. 

Power Button Function:

Quickly press the power button 5 times to power ON/OFF the SPACEMAN. Quickly press the power button 3 times to change the voltage to your favorite temp setting from 2.4V to 4.2V. Quickly press the power button 2 times to activate pre-heat mode.

 

Pre-Heating:

Quickly pull from the mouthpiece twice to activate the preheat function, you can also press the bottom button 2 times to activate the preheat function.

The Preheating will last 15 seconds with 1.8V pre-heat voltage. In the preheating mode, the on-screen flashes, press the power button 1 time or pull on the mouthpiece 1 time to stop preheating.

 

Normal Smoking Use:

Both auto inhale and button power are workable in normal vaping use mode, the guide bar and the sensor will illuminate. 

LED Screen Display:

Power ON: Full-Screen Light Up.

Power OFF: Full Screen Turn Off.

OU: Auto heat shut-off after 10 seconds of use for protection

LO: The power of the SPACEMAN is too low to work and needs to be charged.

‘F2’: When the output is short-circuited, the MOS is automatically turned off to prevent burning.

Working: Flame light When SPACEMAN is working (Preheating & Heating Both)

 

Battery and Charging:

Type-C Fast Charging
Attention: The SPACEMAN battery should be charged for an hour before the first use.

Charging: The three blue lights on the left side of the Screen turn on gradually. Do not smoke during the charging process. Turn off the screen after a full charge.

60%-100%: 3 Blue Grids;

30%-60%: 2 Blue Grids;

0%-30%: 1 Blue Grids;

 

Protection Function:

Short circuit protection: The device will stop working immediately when a short circuit is detected and Red light will flash 10 times.

Overcharging protection: When your SPACEMAN is fully charged, it will stop charging to prevent overcharging.

Overheating protection: The SPACEMAN will pause for about 3 seconds after continuously being heated for 10 seconds. 

 

How To Use

  1. Make sure that the bottom magnetic connector is properly connected to the bottom of the unit. The battery will not charge if the bottom connector is not attached.
  1. Plug into a USB-C cable and connect to a power source, you will see the BLUE light flash when the battery is connected.
  1. Please fully charge the battery before first use, the 4 lights will turn blue once charged, and disconnect the device from the power source before use.
  1. Remove the bottom magnetic connector and firmly screw in the 510-threaded cartridge of your choice.
  2. Insert the cartridge into the device and ensure that the bottom magnetic connector is properly reconnected. 
  1. If the device is powered off, press the power button 5 times to turn it on.
  2. Press the bottom button 3 times or auto inhale 3 times to change voltage.
  3. Auto Inhale on the mouthpiece two times to activate pre-heat, or you can also press the bottom button two times to activate preheat. The preheat time will last 15 seconds @ 1.8V voltage, then will switch to your previously selected voltage.
  1. Simply pull from the mouthpiece or push the button to activate the cartridge.

 

Cleaning Instructions:

Remove the battery bottom.

Wipe the outside and inside of the bottom magnetic connector with an alcohol pad. Use an alcohol swab to wipe any excess oil out of the 510 screw-in connector.

Clean the inside air pathway with an alcohol swab.

Do not submerge any part of the device in the cleaning solution. Allow all parts to air dry before resuming use.